Suppliers: CyberPower VA Rating: 501-1000 VA Watts: 501-1000 Watts Outlets: 9
||Intelligent LCD Series GreenPower UPS
|Input Voltage Range
||90V AC - 140V
||120Vac +/- 5%
||5 x 5-15R Battery/Surge Protected
4 x 5-15R Surge Protected
|Battery Run Time
||Entry-level PC with 19" LCD (150W) - 15 min.
Midrange PC with 19" LCD (300W) - 7 min.
Performance PC with 19" LCD (500W) - 3 min.
|Battery Recharge Time
||1 x Serial DB9; 1 x USB 4-pin
||PowerPanel Power Management
||FCC Class B certified, cUL, UL 1778
|Data Line Protection
||1 x RJ11/45 Combo (One-in/One-out)
1 x RG-6 Coax/Cable
|Surge Energy Rating
||8.75" x 4.25" x 10.5"
Intelligent LCD Diagnostic Display: The innovative
front panel LCD can be used to display detailed information on the UPS
status and current power conditions. The LCD displays 11 different
diagnostics: Input voltage level, Output voltage level, Automatic
voltage regulator, Runtime estimate, Load level, Power frequency, On
battery, Overload, Fault, Battery capacity, and Silent mode.
Voltage Regulation (AVR): Incoming AC power is electronically regulated
for dips and spikes AVR takes this irregular AC power and converts it
into a consistent Sinewave so sensitive electronic equipment can
achieve its optimal performance.
EMI/RFI: Provides shielding
against electromagnetic interference & radio frequency signals.
Most commonly, this is used to prevent line noise or humming that
occurs over telephone lines or stereo electronics.
Connectivity: HID compliant USB port enables full integration with
built-in power management and auto shutdown features of Windows, Linux
and Mac OS X.
PowerPanel PE (TM) Smart Management Software: In
event of a power outage, PowerPanel PE will not only save your open
files and will also Hibernate your PC to increase the run-time on the
UPS unit. PowerPanel is quickly and easily installed on any
Windows-based PC and is designed to utilize minimal system resources.
Diagnostic screens give immediate visuals of the UPS status, and also
include the following features: Silent operation mode, configurable
system notifications, automatic self tests, adjustable high/low voltage
warnings, event/data logging, and scheduled shutdowns.
LED Indicators: LED status lights indicate Power-On and wiring faults.
Audible Alarms: Audible tones identify when the unit is running off battery power, unit overloads and low battery.
Resettable Circuit Breaker: Convenient unit reset switch in case of an overload.