|
|
product description
category: Computers
supplier: Koutech Systems
part #:
IO-PESU220 Suppliers: Koutech Systems Type: PCI Express to eSATA External Ports: 2x eSATA
 2 x eSATAPCI Express to eSATA
| Model |
| Brand |
Koutech |
| Model |
IO-PESU220 |
| Spec |
| Type |
SATA |
| External Connectors |
5 |
| Interface |
PCI Express x 1 |
| RAID |
RAID 0/1/5/ JBOD |
| Operating Systems Supported |
Windows 2000/XP/Server 2003/Vista/Server 2008/Windows 7 and Linux |
| Features |
| Features |
Two (2) external Power Over eSATA connectors; which supports any two of:
- Two (2) 3.0Gbps Serial ATA II ports.
- Two (2) Hi-Speed USB 2.0 ports.
Power Over eSATA connectors will provide 5V & 12V bus-powered via its connectors.
Eliminates the requirement for a separate power source with Power Over eSATA connectors , while maintaining compatibility with the existing eSATA connector form factor.
Enables you to connect up to two (2) SATA or two (2) Hi-Speed USB 2.0 external peripherals (with any combination of two SATA and USB devices).
Fully Plug-N-Play and Hot-Swap compatible.
eSATA:
Compliant with Serial ATA 1.0a Rev 1.1 specification.
Supports RAID 0 (Striping), RAID 1 (Mirroring), RAID 5 (Parity) and JBOD.
Supports bus master DMA at 3.0Gbps burst rate.
Supports high performance Serial ATA devices; such as hard disk drives, SATA enclosures, and other devices.
USB:
Supports Hi-Speed USB 2.0 interfaces via Power Over eSATA connectors & the internal header-pins.
Connects internal header-pins to on-board, motherboard or add on-card, USB connectors to enable Power Over eSATA to support Hi-Speed USB 2.0 function.
USB Specification v.1.0/1.1/2.0 compatible (data transfer rate at 1.5/12/480Mbps).
Hi-Speed USB 2.0 is fully compatible with original USB system, peripherals and cables.
Ideal connection for digital cameras, scanners, printers, external CD/DVD/Blu-Ray writers, hard disk drives, flash memory drives and etc.
System Requirements:
PC with 256MB of RAM and 1.0GHz or faster processor
One (1) available PCI Express slot
Windows 2000/XP/Server 2003/Vista/Server 2008/Windows 7 and Linux.
*Note:
Does not have an actual USB 2.0 host controller chipset; features are enabled via internal header-pins to on-board, motherboard or add on-card, USB connectors to enable Power Over eSATA to support Hi-Speed USB 2.0 function. |
|
